Digitax 3 GMDT Plus
|
DUAL CPU
Primary CPU of this new Mobile Data Terminal (MDT) is VIA EDEN ULV 500MHz, VIAC7-M 1GHz or VIAC7-M 1.5GHz with CX 700 Companion chipset (additional processing power for 3D graphics, multimedia, and streaming functions) and the x86 architecture allows this Mobile Computer to supply a remarkable flexibility and efficiency in computing power.
Secondary CPU AITP (Automotive Intensive Task Processor) supplies the necessary functionalities in the automotive field, like power management, Safe Shutdown, Wheel Pulses Odometer, Distance and Speed calculation, Wake-Up on Ring, Over-the-Air services for software and firmware updates. The AITP is OTA programmable for remote automatic firmware upgrade, and is always powered ON; it can turn-ON and OFF the Device and all its peripherals.
Das 3GMDT Plus Mobile Data Terminal unterstützt folgende Betriebssysteme:
• Windows CE 6.0
• Windows XP Embedded (XPe)
• Windows Embedded Standard
| Display |
◦Viewing area 6.4" diagonal ◦Resolution VGA 640x480 ◦Display Colour TFT Double Replaceable CCFL ◦Brightness Display clearly viewable with 400 cd/m2 ◦Ambient Light Sensor 32 Steps Automatic Regulation |
| Touchscreen: |
◦Full Automotive Rugged Touchscreen with configurable touch areas. ◦Extended Temperature Range ◦Finger Type |
| Central Processor Units | Primary CPU: |
◦VIA EDEN ULV x86 500MHz ◦VIAC7-M ULV x86 1 GHz ◦VIAC7-M ULV x86 1.5 GHz |
Companion Chipset: | VIA CX700 Companion Chipset allows additional processing power for 3D graphics, multimedia, and streaming functions | Secondary CPU: | Secondary RISC CPU for Automotive Intensive Tasks | Fan Control: | Automatic and Programmable Fan control with Internal Temperature Sensor and PWM Driver |
| Memory | Ram Memory: |
◦256MB RAM ◦512MB RAM ◦1GB RAM |
Internal Flash Memory: | 256 MB up to 4 GB capacity | Hidden Disk: | 128 MB Protected Hidden Disk (Soldered Flash Disk, available with WinCE version) Bootable | External Memory: | SDHC (High Capacity compatible) socket |
| Communication | |
| Modem: |
◦GSM/GPRS Class 12 ◦2 Hardware RS232 Serial Ports available on the modem (Hardware MUX) allow both RAS and AT command from user applications ◦Modem can be powered on when the terminal is off ◦Wake-up on ring programmable features ◦Board to Board connector pin to pin compatible with EDGE (option) and UMTS (option) retrofit upgradable ◦Warm reset and cold reset (dedicated electronic circuit) available through API calls ◦2 Sim Card slots with Software switcher available through API calls ◦Support international standard protocol (ETSI AT command set) ◦Supports RAS (Remote Access Service) dialup function ◦GPS / GPRS Rugged Combo antenna (option) |
| Positioning | |
| Model: | U-Blox 5 GPS Receiver |
| Channel: | 50 channels |
| Supported Positioning System: | Hybrid GPS, GALILEO and SBAS (WAAS, EGNOS, MSAS, GAGAN) engine |
| Antenna Monitor: | Disconnection and Short Circuit Detection / Protection |
| Protocols: | Supports international NMEA standard format and proprietary UBX Binary protocol |
| Reset: | Warm reset and cold reset (dedicated electronic circuit) available through API calls |
| A-GPS: | A-GPS |
| Dead Reckoning System: | GPS + Gyroscope + Odometer with EKF (Enhanced Kalmann Filter) (option) |
| Antenna: | GPS / GPRS Rugged Combo antenna (option) |
| Acquisition: |
◦Cold starts: 29 s ◦Warm starts: 29 s ◦Aided starts: < 1s ◦Hot starts: < 1 s |
Accuracy: | Position 2.5 m CEP | SBAS 2.0 m CEP | Correlators: | Over 1 million effective correlators | Time to First Fix: | Under 1 second Time-To-First-Fix for Hot and Aided Starts | Sensitivity: | SuperSense® Indoor GPS: -160 dBm tracking sensitivity | Update Rate: | 4 Hz position update rate | Security: | High immunity to jamming |
| Wireless Connections | |
| Bluetooth: | Built-in Bluetooth EZURIO Bism2, Class 1 Bluetooth version 2.0, Range in excess of 300 metres and Data transfer rate up to 300 kbps |
| Hardware Keys | |
| General Purpouse Keys: | 5 Lighted and Software programmable Hardware Buttons |
| Power on key: | 1 Smart Power On/Off button |
| Inputs and Outputs | |
| USB Host Ports: | 2 USB Host, with USB Support for Mouse and Keyboard |
| Power on key: | 1 Smart Power On/Off button | Serial Ports: |
◦4 Internal Free RS232 Serial Ports ◦4 RS232 Serial Ports Available through External DerivBox (option) ◦2 RS232 Serial Ports available on embedded meter to connect 2G IU, Printer and Smart Roof sign (Option) |
| I/O ports connection: |
◦6 Digital Inputs ◦2 Analog Inputs ◦7 Power Output Ports ◦Dedicated Ignition input ◦Dedicated Emergency Switch input ◦1 PS2 Keyboard Connector ◦LAN Connectivity for debug and development (option) ◦Video Grabber RGB Composite Input Port |
| Alarm and Security | |
| Stealth Mode: | Stealth Mode Controller (system ON display, audio and lightings off) with Panic Button input |
| Stealth Display Feature: |
Fully Programmable Stealth display mode, Screen saver mode and sleeping mode by: ◦Power Button ◦Hardware Key ◦API Enable Switching Off LCD without powering down MDT unit |
| Multimedia | |
| Multimedia: |
◦Speaker and Microphone ◦Supports wave speaker volume control ◦API provided ◦Playback wave and speech files |
| Boot | |
| Triple Boot Manager: | Boot from Flash Disk, SDHC Card and Hidden Protected Disk with FileSystem Integrity Check, OTA Application update, Peripheral GPS and GPRS Power Management |
| Boot Time: | 35 sec | Splash Screen: | Customizable Boot Up Splash Screen with End-User Logo |
| Software Reset, Restore and Update | |
| Soft/Hard Reset: |
◦Soft Reset available through HW switch ◦Soft Reset available by API calls ◦Hard Reset available by Hidden Protected Disk or SDHC Card (Factory default) |
| Safe Windows shutdown procedure: | Preshutdown notification | Disk Activity Signal Control |
| On-Board UPS | OS Image Loader: | Over The Air (OTA) OS image loader or Hidden Disk Image Loader or SDHC Card Image Loader |
| System Update Fleet Management: |
◦Professional OTA (Over The Air) CLIENT allows the update of the whole Operating System and all the CPUs Firmware (option) ◦Professional OTA (Over The Air) SERVER with vehicles enrolling, group management and selective update, remote debugging and logging. Web based user interface (option) |
| Operating System | |
| Windows CE: | WinCE .NET 6.0 or Windows Embedded Standard / Windows XPe, with ATL, MFC, .NET Compact Framework 3.5 and Digitax Framework 4.1 |
| Softwares and Tools | |
| Digitax Framework 4.1: |
◦Digitax Libraries: ◦GPS ◦GPRS ◦VoiceCall ◦I/O ◦Odometer ◦Taximeter ◦Hardware Keys ◦WatchDog ◦OTA ◦Windows Status ◦Stealth Mode Controller ◦Logs ◦Backup And Restore ◦Light Dimmer ◦Hardware Identification ◦Splash Screen ◦Alarm ◦Card Reader and Windows Status |
| Development Tools: |
◦ActiveSync 4.5 (last version available) and USB debugging with ActiveSync support ◦SDK for Embedded Visual C++ 4.0 (EVC4) ◦Sample code for SDK in C++ ◦Compact Framework 3.5 supported ◦Serial port driver and test tools ◦Digital I/O driver, API (DLL) and test tool ◦Read/Write Windows CE registry application and API to Supports permanent saving of system settings into registry ◦Software controllable Warm Restart and test tool ◦GPRS modem driver and test tool ◦GPS driver and test tool ◦Speaker and MIC test tool, wave playback and voice recorder ◦Contactless / NFC reader driver and test tool ◦Backlight control API and test tools ◦Ping tool ◦Dialup network ◦GSM phone dialer ◦Support network protocol TCP/UDP, IP, PPP ◦Virtual keypad ◦Text file editor ◦Explorer |
Text-To-Speech: | Support 3rd party Text-To-Speech |
| Software Navigation: | Support 3rd party map application and navigation software with SDK |
| Diagnostic and Maintenance | |
| System diagnostic tools: |
◦On Field Test (OFT) OnBoard Diagnostic Utilities with Customizable CheckList to make tests of: ◦GPS Fix ◦GPS Antenna ◦GPRS Connectivity and Base Station Signal Quality ◦Odometer ◦Ignition ◦Panic Button ◦TouchScreen calibration ◦Hardware Keys ◦Ambient Light Sensor ◦Device version ◦OS Version ◦AITP Version ◦Taximeter ◦UPS and Battery Status ◦Roof Light ◦Navigation Software ◦All On Field Tests and enrolling features can be used during first installation and swap of devices |
| Taximeter: | Embedded Hardware Taximeter, Full Firmware and TARIF OTA Programmable | Power Supply: | 8 - 32 V with Surge Protector |
| Battery: | On-Board UPS with External Battery Package, Standard Battery Pack 30 minutes |
| Mounting | |
| Sealing: | All the External Connectors, Accessible slots (such as SIM Card, SDHC, USB, etc.) and Screws are Sealed |
| Certifications | |
| Operating Temperature: | -20°C to 70°C |
| Humidity: | Humidity up to 95% non-condensing. | Vibration: | Vibration Sine wave, 10 ~ 500 ~ 10Hz, 1.5G, 0.37oct/min 3 axis, 1hour/axis. |
| Dust Ingress Protection: | All connectors covers sealed, no open holes | Dimension: | 209 mm x 154 mm x 67 mm (H x W x D) |
Importeur für Digitax Produkte in Deutschland - Taxitech Handelsges. mbH - Sommerkamp 31a - 22335 Hamburg - Tel: 040/ 51 311 288